All Posts By

Logos Industries

Digital TV in Fiji

By | Victron Energy

If you are a state broadcaster, Fiji is a difficult region.

900,000 Fijians live on 110 of the nation’s 330 islands …which are sprinkled over a huge area of the Pacific Ocean. Staying in touch with island news, or enjoying the region’s entertainment programmes, has always been challenging – often marred by weak signals and power outages. That’s all changed. Fiji now has ultra-modern Digital TV available to 97% of the population. How has this been achieved?

Fiji is well organised and has one of the best-developed economies of the Pacific region, based mainly on tourism and sugar. Yet the Fiji Broadcasting Corporation struggled to provide a reliable service owing to the mountainous topography, and difficulties of getting power to offshore repeater stations using fragile infrastructure, dogged by extreme weather events.

New Zealand based Hi Tech Solutions were the company chosen to provide the infrastructure for a major installation which would allow for the Digital switch-over. The key to the success of the project, says Hi Tech’s Derek Gaeth, lay in their decision to install all components inside 20 foot shipping containers. This allowed for the system-build to take place in the controlled environment of Hi Tech’s own workshops; and greatly simplified transportation to the often remote sites of the transmission stations. Equipment for the larger sites required 5 containers to house batteries, inverters, generators and fuel tanks; together with all the switching gear required for Digital, FM, and Data Transmission. The ‘container’ solution also allowed for short on-site build times – where arrival at bare site to sign-off could be achieved in less than 7 days.

Grid electricity is unreliable, so provision has been made in all locations to include solar power  …virtually guaranteeing 24 hour continuous operation under any circumstances. The power demand at the larger sites is around 12kWh – though this can be reduced in abnormal circumstances and still provide essential services.  Apart from reducing the carbon footprint – most power is diesel generated – the solar power provision also reduces cost: The largest site alone is projected to save FJ$1.3 million over three years.

Power from the solar panels is stored in Redflow’s Zinc-Bromine flow batteries. These have been chosen for their long life (10 years – guaranteed); their ability to withstand 100% depletion – without damage, and full recovery; and also because they have proven to operate flawlessly in the high tropical temperatures for which the islands are so popular as a tourist destination.

These large-format 10kWh batteries can be paralleled into huge capacity storage – 600kWh in the largest Fiji installation – though even larger banks have been built elsewhere in the world. An added advantage is that their very weight (of 240kg) is a deterrent to theft in remote locations which cannot be ‘policed’.

GreenAkku – Victron Energy powered Tiny House

By | Victron Energy

Victron Energy dealer Bosswerk GmbH & Co. KG or GreenAkku as they are usually known are based in Nettetal, about 30km West of Düsseldorf. They have developed the Tiny House you see in the photo above.

GreenAkku will be attending Caravan Salon Düsseldorf 2018 in FG Hall 11/11-03 later this week, between Aug 25th – Sep 2nd, where their Victron Energy powered Autarkes Tiny House will be on show.

Additionally Victron Energy’s display will be in Hall 13/D82 and Victron Energy dealer Accusysteme Transwatt GmbH will be in Hall 13/E64.

If you are not familiar with the tiny house movement then I’d like to refer you to an earlier blog which explains all: At home with Victron Energy – The Tiny House revolution

If you are familiar with Tiny Houses then why not jump right in and check the spec of GreenAkku’s fully loaded Autarkes Tiny House.

Self-sufficient Autarkes Tiny House – micro living without loss of comfort

Exterior construction & weights

  • Wooden clad exterior in Siberian larch, natural untreated. Insulated with 70mm PUR.
  • Interior ceilings and walls in beech plywood sliced veneer.
  • Floor in bamboo parquet.
  • Supporting beams made of Paulowinia wood which is 30% lighter than spruce-fir for the same strength.

© 2018 Logos Industries.
All Rights Reserved